Superbly priced, entry level table saw capable of a wide range of projects in the workshop.
The saw is supplied with a rigid steel floor stand, lifting the table to a convenient height. The 10″ diameter saw blade is powered by a 2hp motor and able to cut up to 3″ deep in softwoods, hardwoods and man made boards. The blade itself is a 40 tooth Tungsten Carbide Tipped (TCT), for fast cutting performance.
The table top is manufactured from steel with 3 additional extension tables giving a large flat area for working with panels. There are 2 slots for the crosscut mitre fence to run in. The crosscut fence can be adjusted to any angle within a 120 degree range. The aluminium fence can then be adjusted to close the gap to the saw blade.
The ripping fence can be used on either side of the blade and locked in position using the quick action clamp. The scale is clearly marked in millimeters, up to 280mm, with a built in reader. The aluminium fence can be used in the High or Low position, the latter allowing very narrow cuts in thin materials.
With safety in mind, the saw is fitted with: thermal overload protection (to protect the motor against over use); an NVR switch (to prevent re-start after a power failure): a push stick with storage clips on the side of the machine, ensuring it can always be located quickly.
Supplied with left, right and rear removable extension tables, floorstand, mitre fence adjustable 60 degrees each way, dust extraction outlet 43mm diameter, 40 tooth TCT blade, push stick, cable and plug.
Table size 730mm x 635mm
Maximum ripping width 280mm (11″)
Blade tilt 90 – 45 degrees
Cutting depth at 90 degrees 85mm (3″)
Cutting depth st 45 degrees 60mm (2.4″)
Blade diameter 254mm (10″)
Blade bore 16mm
Table height 895mm
Motor(carbon brush) 1500w (2hp) 240v
Dimensions (WxDxH) 740mm x 950mm x 1070mm
Waranty 1 Year
Large Area Steel Working Table
Powerful 1500w (2hp) Motor
Quick Action Rip Fence – Can Fit Left or Right
T-Slot Sliding Mitre Fence Included
Floor Stand Included