Steel chassis construction.
Grinding wheel angle control with large aluminum knob.
Will hold each blade head position by a position lock.
X axis feed wheel, stable and very sharp grinding.
Rotary angle mark.
Running Speed: 2850rpm
Adjusting Angle Of The Wheel: ±20°
Handle Turning Angle: 30 Degrees From Left And 45 Degrees From Right
Working Diameter: 80700mm
Method of operation:
1, loosing the fascia, then adjust the angle of grinding blade and fasten.
2, adjusting of center axle.
Rotating the center axle to the grinding blade.
Pushing the center axle to the right.
Installing the saw blade ,rotate the wheel and decide the position of grinding surface saw teeth.
Rotating the rotation table to ensure the angle of grinding blade.
The cross angle between the grinding surface and work surface is about 5.
3, adjusting of positioning assembly.
Adjusting the saw blade to the best grinding position, rotating the positioning frame and fascia.
Adjusting positioning pin to the proper base of saw teeth and leave gap of grinding quantity, fasten the fixed screw.
Fourth, adjusting the center axle to the same gap of grinding quantity to the right.
Last, when all the parts are fastened, the saw blade supported with hand will be grinded.
Should match the standard voltage; We must strictly take a good ground, install leakage circuit breakers.
The machine should be set in a dry, clean, steady and parallel place.
Release the round plat and then adjust the saw blade angle.
Check all parts that need locks before operation.
Take off the electricity after work finishing.
After the machine runs well then you can start the work.
NOTE: This Item Ship From UK
The machine structure is strong and it can work on max diameter700mm.
The specially equipped motor has a very good running speed which can have a very good co-operation with the diamond sanding wheel.
The direction of the sharpening should be paralleled with the diamond sanding wheel, it is better for grinding the back teeth face.
This machine is designed for sharpening various kinds of carbide tipped saw blades from size 80mm to 700mm.
Also suitable to grind other material such as plastic, wood, aluminum alloy for different purpose like furniture manufacturing, decoration etc.